Mulch Bond

Color Protecting Mulch Stabilizer

  • Dries clear while enhancing color
  • UV protection to keep mulch from fading
  • Surface remains flexible and permeable
  • Keeps mulch from spreading
  • Helps minimize weed growth
  • Use on Sand or dirt to control dust
Sylva Mulch Bond is a liquid mulch stabilizer that holds mulch in place and extends the life of ground cover materials 1/4" to 2" in length. It bonds and stabilizes mulch to protect it from the effects of wind, rain and other environmental elements.
Safe for use around plants and animals. Surface remains flexible and allows water and nutrients to pass through, while helping to deter weed growth.


Up to 100 sq. ft. per gallon. Coverage may vary depending on surface andapplication.


  1. To increase effectiveness, press mulch in place to compact the area.
  2. Lightly water mulch before applying to increase bonding of mulch stabilizer.
  3. Spray mulch stabilizer in a slow, even, saturating coat.
  4. For better stabilization, a second coat is recommended. Allow first coat to dry at leaset 2 hours
  5. Let dry for 24 hours without rain or sprinklers.



  • Apply with pressurized sprayer for larger areas.
  • Maximum bond strength after 24 hours.
  • Do not apply if rain is forecasted within 48 hours. Mulch needs to stay dry during the curing process.
  • Apply when the temperature will stay between 50-80 F for 48 hours before and after installation.
  • Avoid spraying directly onto plants or trees.
  • Not recommended for pine/chunk bark nuggets.
Rinse off all equipment with clean water and let dry. KEEP FROM FREEZING. Store container in a cool area with cap or lid firmly in place.

©2020 Sylva Corporation • Princeton, MN 55371 • All Rights Reserved 

Terms & Conditions